In addition to material cited in this book, this bibliography includes a
few additional references that are pertinent to register transfer level
design.
Bjorner, D., Flowchart Machines, BIT, 10, pp. 415-442, 1970.
Barnes, J.H., R.M. Brown, M. Kato, D.J. Kuck, D.L Slotnick, and R.A. Stokes,
The ILLIAC IV computer, IEEE Transactions on Computers, Vol. C-17, No. 8,
pp. 746- 757, August, 1968.
Bartee, T.C., I.L Lebow and IS. Reed, Theory and Design of Digital Systems,
McGraw-Hill Book Co., New York, 1962.
Bell, C.G., J.L Eggert, J. Grason, and P. Williams, The Description and use
of register transfer modules (RTM's), IEEE Transactions on Computers, Vol.
C-21, No. 5, pp. 495-500, May, 1972.
Bell, C.G. and J.Grason, Register transfer modules (RTM) and their design,
Computer Design, pp. 87-94, May, 1971.
Bell, C.G. and A. Newell, Computer Structures: Readings and Examples, McGraw-Hill
Book Co., New York, 1971.
ACM, Record of the Project MAC Conference on Concurrent Systems and Parallel
Computation, Publication of the ACM, June, 1970.
Breuer, M., Design Automation of Digital Computers, Vol. I Hardware, Prentice
Hall, Englewood Cliffs, N.J., 1972.
Chapin, N., Flowcharts, Auerbach Publishers, Philadelphia, 1971.
Chu, Y., Computer Organization and Microprogramming, Prentice Hall, Englewood
Cliffs, N.J., 1972.
Chu, Y., Introduction to Computer Organization, Prentice Hall, Englewood
Cliffs, N.J., 1971.
Clark, W.A., Macromodular computer systems, Proc. SJCC, pp. 335-336, 1967
(introduction to a set of 6 papers, pp. 337-401, in same proceedings).
DEC, PDP-16 Computer Designer's Handbook, Digital Equipment Corporation,
Maynard, Mass., 1971.
Dennis, J.B. and S.S. Patil, Computation Structures, notes for Subject 6.232,
Massachusetts Institute of Technology, Department of Electrical Engineering,
1970.
439